Iron stain: on skirt, trousers, blouse.

Even in everyday household chores, you can make a mistake, and ironing is no exception. The appearance of a stain can cause real panic, but you should not despair - remove the stain from the iron on clothes, perhaps even on white fabric. To get rid of it completely, you need to choose the correct cleaning method, taking into account the color and type of product. Also, the choice will be influenced by the degree of damage to the area - fresh traces from the iron can be removed in just a matter of minutes.

Can I remove a stain from an iron

The burned stain from the iron appears due to the burnt fibers of the fabric, and not due to the contact of the material with the metal. The most common cause is a broken iron or the wrong ironing mode. The type of fabric directly affects the permissible temperature of the appliance, usually this information can be found on the label. It should always be taken into account when processing material, even if the work needs to be done as quickly as possible. The most annoying reason for stains on fabric is forgetfulness, because it is so easy to get distracted from ironing and leave a hot iron on clothes.

The sooner you can start removing the tan from the iron, the higher the likelihood of wiping it off completely. The most difficult thing to remove burns from wool and viscose due to the nature of the material. The burnt fibers of woolen products can be removed mechanically, but then the integrity of the entire fabric pattern will be violated. You can clean the burn marks from the iron with the help of improvised means; you do not need to use expensive household chemicals.

How to remove iron stains from various fabrics

Iron marks on different fabrics do not look the same, so the methods of getting rid of them differ. On white clothes, the burn looks like a rusty tan of a different shade depending on the degree of damage. Black products begin to “shine” with shiny stripes, which are difficult to get rid of without knowledge of special methods. Synthetic fabrics literally burn, leaving a black mark on them. Methods for removing iron stains from different fabrics are shown below.

How to remove iron stains on white fabric

Yellow spots on a white shirt from an iron are a terrible dream of every housewife, because in the contrast of colors the burn looks terrible. You should not despair, because you can try several ways to remove stains from light-colored fabric:

1. If the stain is found immediately after it has appeared, you can use regular laundry soap.It is enough to wash the stain and leave the clothes to dry in the sun.
2. More difficult stains are removed with saline. Sprinkle a little salt on a cloth soaked in warm water, wait until the cloth dries. After that, wipe off the salt with a soft bristle brush, and the burn will go away with it.
3. Bleach, which is capable of completely eliminating even rusty stains. To do this, dilute 1 tsp in 0.2 liters of pure water. means and wash away the stain. Then rinse the clothes thoroughly and dry them.

It is important to promptly take measures to remove burns, because it is more difficult to remove yellow spots from the iron over time. At the same time, rubbing the damaged area too intensively is not recommended - especially if the product is thin.

How to remove an iron stain on black fabric

In case of unsuccessful ironing of black clothes, the actual problem becomes how to remove shiny stains from the iron. Such stripes spoil the appearance and are very noticeable in bright light, they must be washed. There are 2 surefire ways to solve the problem - lemon vinegar or laundry soap, but it's better to use them separately! Moisten the gauze in a warm solution of laundry soap and iron the damaged item through it. Once dry, the streaks should disappear.

You can also use table vinegar, for which a cotton pad is moistened in it and the stain is wiped. After that, you need to iron the treated area through a thin cloth, high temperature is needed as a catalyst. The only downside to using this product is the slight odor that vinegar leaves. Therefore, before an imminent important meeting, it is better to use the first method.

If a tan has just appeared, place the item under cold running water to minimize damage. This will allow the strip temperature to cool down, the fibers will no longer break down. The above products are quite strong and can leave marks on fine fabrics. For safety reasons, it is recommended to check their effect on an inconspicuous area of ​​clothing. If you are pressed for time, you can use an eraser or pumice stone. You need to act according to a simple scenario - just rub the affected area of ​​clothing with a bar of material. It is important that the eraser is normal, without drawing.

How to remove iron stains on colored fabric

On things of different colors, you can wipe off the burns from the iron using unusual means, for example, yogurt. It is necessary to soak the spoiled clothes in the product, and then wash in it. Then rinse thoroughly - the stains should disappear. You can also use lemon juice, just rub it over the damage - this option is appropriate for light stains.

Gruel from finely grated onion is an excellent tool for removing black stains from the iron. It is enough to apply it and leave it for 2-3 hours, then rinse the fabric thoroughly so that there is no smell. This method has an important limitation - it cannot be used on silk items.

How to remove an iron stain on natural fabric

If a burn has just appeared on the tissue, you can try to remove them using simple methods. In order not to spoil the material, it is convenient to use the following table:

After using any or the listed products, wash clothes in the usual way. If it was not possible to remove the damage, you should use the following methods.

How to remove iron stains from jeans

Jeans occupy the main place among everyday things - there is at least one pair in every person's wardrobe. Most often, the fabric for sewing them is cotton, so removing iron burns is not a problem. To do this, you need to mix in a 1: 1 ratio of ammonia and 3% hydrogen peroxide. Moisten a cotton pad in the solution and wipe the damaged area with it. Wait 10 minutes, then wash the treated stain with laundry soap.

Boric acid can be used on light colored linen jeans. After processing, you need to wait 5 minutes and just wash off the substance with warm water. Work better with gloves!

How to remove iron stains on a down jacket

An iron stain on a jacket can be removed with boric acid if it is made of synthetic fabrics - polyester, for example. It is enough to mix it with water in an equal ratio and apply the solution to the burn. Wait 15 minutes, then rub off the treated surface.

For a wool coat, this method is, of course, unsuitable. Armed with a nail file, you need to carefully peel off the top burnt layer, then wipe the fabric with your hands as in washing. The movements should be soft so that the fabric does not stretch.

How to remove iron stains on fabric using folk methods

Laundry soap is good at removing iron stains, but only if they are completely fresh. It is also powerless against severe burns - for example, it will not work to clean black trousers from the iron with this tool. However, other popular recipes successfully cope with similar problems. They must be used strictly according to the recommendations indicated, especially when it comes to choosing a product for delicate types of materials. The following improvised means are recognized as the most successful in this area:

• soda;
• lemon juice;
• salt;
• onion;
• table vinegar;
• alcohol;
• hydrogen peroxide.

The variety of the list is amazing, but you shouldn't be surprised - all of the above have excellent cleaning properties. Even sour milk can be used for this purpose!

How to remove iron marks with lemon juice

This product can be used on all fabrics except those that are afraid of bleach - silk and wool. For this method, you need to adhere to the following algorithm:

1. Squeeze lemon juice onto the stain, it must be fresh.
2. Put the processed item in a bowl of hot water for 15-30 minutes.
3. Rinse and wring out.

This method does not leave an unpleasant odor, therefore it is suitable when there is a lack of time. To remove stubborn stains, sprinkle with powdered sugar on top of lemon juice, leaving to dry completely. After that, clothes should be washed in warm soapy water, rinsed thoroughly in clean water.

How to wipe away an iron stain with black tea

This method is one of the available, because tea can be found in any kitchen. First of all, you need to brew a strong drink - the brew can be packaged or sheet. Moisten gauze or cotton cloth in it, squeeze well. Put it on clothes and iron it on top, no force is needed. This method is only suitable for dark clothes, when used on light materials, the color shade may change.

How to remove soda from an iron

A fresh stain can be removed with baking soda - this method compares favorably with its cheapness and absence of an unpleasant smell. The tan must be moistened and sprinkled with soda, wait for soaking. With a sponge or a brush with a soft bristle, begin to gently clean off the trace, following from the edge to the center - otherwise the fabric will become thinner. If the stain is still visible after the procedure, repeat it again. This method is perfect for silk products - the smooth surface of the fabric will not be damaged.

If success fails again, the baking soda can be replaced with salt. In this case, you need to wait until it is completely dry, only then proceed to cleaning.At the end, the thing must be rinsed in warm water. To remove very strong propalins, use lemon juice with salt. Salt is applied to the pre-moistened cloth - the further algorithm of actions coincides with the previous method.

How to clean an iron stain with brown

Borax or ethyl alcohol will help with shiny streaks on black clothes. You can remove such a stain from the iron on the skirt with an aqueous solution of borax in the ratio of 1 tsp. for 200 ml of water. The solution is applied to the damaged area; after drying, the clothes should be washed in the usual way. This method is great not only for dark, but also for colored synthetic fabric.

To save things from viscose, ethyl alcohol is suitable, which is applied to a shiny strip, leaving for 1 hour. After that, the thing must be rinsed in clean water. The only drawback of this method is the characteristic odor, due to which the processed clothes must be washed in the washing machine.

How to remove yellow stains from an iron with onion juice

Onion juice is a surefire way to remove iron-burnt stains from a suit, and it will work even on black charcoal stains. For light damage, you can use onions without squeezing out the juice. It is enough to cut a mature onion into halves and wipe the burn with them. After the stain has been washed, you need to wash the item in the usual way. The final stage is necessary, because the onions will smell even after washing with laundry soap.

To remove strong stains, you need to use a more concentrated composition - gruel from finely grated onions, for which the vegetable is rubbed on a fine grater. It must be applied to the damaged fabric, wait 15-20 minutes, and then wipe with a soft cloth. Then rinse the item and wash it in the washing machine. This composition is good for iron stains on woolen products. Usually, burns are removed with a nail file, peeling off the burnt layer, but the onion will speed up the removal of damaged fibers.

How to remove a vinegar stain after an iron

Removing whitish iron streaks from black trousers is the hardest part, especially if the laundry soap hasn't helped. With a cotton pad dipped in vinegar, you need to go through the damaged area, then iron the stain through the fabric. This must be done carefully, without pressure, so as not to make a mistake again. Sometimes garments are rinsed in a weak aqueous solution of vinegar after onion treatment - this helps to remove the pungent odor, and also complements the cleansing properties.

How to remove an iron stain with wine alcohol

Viscose silk requires a scrupulous attitude, the methods listed above are unacceptable in working with it. Wine alcohol will help wipe off the burn. The processed item must be dried in the fresh air, and then rinsed in warm water.

How to remove an iron stain with hydrogen peroxide

Hydrogen peroxide is an all-in-one treatment for stains and shiny streaks.

1. Smooth out the damaged fabric on a flat surface.
2. Moisten gauze in peroxide, lay it on top so that it fits snugly to the stain. Fold gauze in 2 layers.
3. Lay a dry cloth on top to create a three-layer construction.
4. Iron the top layer with an iron heated to medium temperature.
5. Moisten the middle layer periodically with peroxide.
6. After removing the stain, wash clothes as usual.

It is not necessary to press on the fabric during ironing, it is the uniform hit of the substance on the damaged fabric that is important. It is also not worth raising the temperature - this will only lead to the secondary appearance of stains.

How to remove iron stains with bleach

Removing iron scale from clothes is sometimes a tricky task, which bleach can handle if the above methods did not help. The product must be diluted in water at the rate of 2 caps per 5 liters of water. Stir the solution, soak clothes in it, stir occasionally.Skipping this step will cause the bleach to settle. After that, wash the thing in the usual way, dry it in the fresh air.

This method is not suitable for delicate fabrics. These include mohair, silk and wool. The limitation also applies to cheap colored things - there is a great risk that the paint will peel off. The surest way to find out if bleach can be used is to look at the label that contains this information.

How to remove an iron stain with detergent

This is not a powerful product, but it does a good job of removing yellow stains if your laundry has been washed recently. To remove traces from the iron, moisten the burned area with warm water, then apply detergent. A liquid composition or a diluted powder is suitable - there is no difference in effectiveness. After that, you need to leave the treated clothes for half an hour, then load into the washing machine according to a suitable program.

How to clean iron marks on clothes with milk

This method is suitable for removing stains from cotton items. You need to use sour milk - yogurt or kefir, first diluted with water in an equal ratio. Damaged tissue should be soaked in such a solution or simply generously lubricated with a generous amount of oil for light spots. After an hour, rinse the thing under running water so that there are no curd clots left - they will appear as white spots. The final touch is a standard wash as recommended.

If you can't get rid of iron burns with folk remedies, you can use bleach. In the event that the thing is from a delicate expensive fabric, it is better not to risk it and take it to dry cleaning. The fresher the tan is, the easier it is to get rid of it - you should not hesitate in solving the problem.

Preventing iron stains on clothes

Ironing things, despite the simplicity of the process, needs careful attention. The iron should be cleaned regularly, for example, with diluted citric acid, so that no scale builds up. It can get on clothes even without a burn - large stains in the form of rusty drops will definitely ruin the appearance.

Usually, during ironing, the hostess tries to do several things at once or rushes in the early morning - both situations are fraught with the appearance of burns on the fabric. Therefore, ironing should be carried out calmly, without trying to speed up the process due to intense movements and pressure. If a tiny mark appears, you can try to remedy the situation as follows: moisten the speck and iron it through cheesecloth. Iron marks are processed from the wrong side. A sure sign of success is the appearance of yellow spots on the gauze.

Acceptable conditions of care - ironing and washing - are indicated on the tag of any item. You just need to adhere to temperature regimes to avoid damage to things. For synthetic fabrics, the acceptable range is as follows:

• elastane, polyamide - up to 75 degrees;
• nylon - up to 100;
• lavsan - 120;
• polyester - up to 150.

Acrylic needs a more delicate regime, and therefore it can only be processed with steam. This rule must be taken into account every time you iron.

Conclusion

Removing iron stains from clothes is a problem that many consider insoluble. However, experienced housewives know that even simple cheap products that are always at hand can perfectly cope with burns on fabric. The choice of the correct cleaning method depends entirely on the severity of the burn and on the fabric itself. Regardless of this, however, the removal of stains should be smooth and neat so as not to damage the clothes even more.