How to wash crib bumpers

Bumpers in the crib are a must. After all, they exclude traumatic situations, the child will not hit a rigid structure. Also, the products prevent the penetration of pets, retain heat and give the sleeping area an aesthetic appearance. It is recommended to wash the sides in a crib for newborns immediately after purchase and in the future - as they become dirty.

Bumpers (otherwise bumpers) are attached to the sides of the bed with Velcro or ties, fixing them or removing them is easy

Is it possible to wash the sides in the crib

A set of children's bedding includes individual elements or a solid bumper along the entire length, as well as a pillow from the same filler - you have to wash it more often. There are many advantages to using a protective agent, but there are also disadvantages. Even a product made of high-quality material accumulates dust, and particles of allergens get along with it. Therefore, it is not only possible to cleanse it, but also necessary. How and how often to do this depends on the filler and the fabric from which the covers are sewn.

If the product is new, purchased in original packaging, it is the parents' choice to wash it immediately or later. You can iron the sides with an iron in the steaming mode. For used products, cleaning is necessary, it is also necessary if the packaging or the manufacturer is in doubt. There is always a label on the product with care recommendations in special signs, by which they are guided in order to properly wash the sides for the crib. The filler from which the kit is made is also indicated.

Several materials are used for a children's product:

1. Foam rubber - the most common option, you can wash it in any way. Automatic cleaning is allowed on the manufacturer's label, and it is used more often. Bumpers with this filler will last longer, regardless of the frequency of wet cleaning.
2. Holofiber... Products made from it are lighter, softer, keep their shape well. The material is used by leading manufacturing companies, so they are more expensive. It is better to wash the sides and pillows with holofiber automatically, they become more voluminous after spinning.
3. Sintepon - the material is inexpensive due to its poor quality. It is necessary to wash the sides immediately after purchase and during operation - at least once every two weeks. The filler absorbs and accumulates not only dust particles, but also odors, the crib looks untidy. The material is collected in a lump, and it is problematic to distribute it, it is better to refuse the machine, you will have to wash it with your hands.

How to wash the sides in a crib

There is a special line of products for baby clothes - powders and gels. They wash the sides in the crib for newborns only with them. Minus - they rinse out worse, the bumpers are bulky and the filler is dense, the particles of the detergent may remain after rinsing, which is highly undesirable. It is better to wash in a typewriter with gels, they are selected according to the color of the product. They take into account the age of the child, this information is indicated on each product.For newborns, the "Eared Nanny" is suitable.

It can be washed by hand with baby bath foam of any manufacturer, but it is used more often in the first months of a child's life.

You can clean the sides with your hands with baby soap without flavored additives

How to wash crib bumpers

Bumpers for a crib can be washed in two ways - in a typewriter or by hand. Automatic cleaning is carried out with the addition of a cleaning agent; manual cleaning can be carried out with or without gel, soap. If there are no stains on the product, you can soak it for a few minutes in warm water, then wring it out and repeat the procedure.

Before work:

• bumpers are removed from the crib;
• carefully examine;
• dirty places are gently rubbed with a sponge soaked in washing gel;
• leave for 30 minutes;

If the stains are problematic, you can use laundry soap: cover the surface, remove the residues with water before main cleaning.

How to wash the sides in a crib in a washing machine

If the set consists of several parts, and the filler is bulky, it is better to wash the sides in several passes so that the products rinse well.

Cleaning sequence in the washing machine:

1. The parts of the kit are evenly distributed over the drum so that they are not lumpy.
   
   

   Parts should not be squeezed, leave enough space in the drum so that after spinning they take their original shape
2. Use the delicate wash mode (the program will set the parameters itself) or use the manual setting.
3. Time - 30-40 minutes.
   
   

   In case of heavy pollution, the mode is increased to 60 minutes.
4. Temperature - +300 C.
5. The spin is set to the maximum, except for the padding polyester filler (for such sides, the mode is turned off completely).
6. It takes two rinses, you can add a baby conditioner, using flavored products is not recommended.

If, after wringing, foam stains from the detergent remain on the glass of the lid, the rinsing procedure is repeated.

How to wash the sides of a crib by hand

After removing things from the place of sleep, study the recommendations for care so that the water temperature matches the icon on the label. Examine the product for problem spots. If there are complex contaminants, spread the part of the kit on a plane, make a soapy solution and gently clean the stain without strong pressure. If it did not work out the first time, the problem area is covered with gel and left for 25-40 minutes.

You can manually wash the bumpers in the following way:

1. The kit is distributed by color.
   
   

   Light details are washed separately from dark ones
2. Use water + 400C, soak the parts separately in soapy water for 15 minutes. If the sides are all light, they are lowered together in a bath of water.
3. Then they squeeze out, collect a clear liquid, add a gel and start cleaning.
4. When the product is washed, it is wrung out, but not twisted.

Rinse in warm water, change it until no foam remains on the surface.

How to dry the bumpers for a crib

Dry the crib kit carefully so that there is no moisture and unpleasant smell of dampness in the filler:

1. To prevent the product from losing its shape, it is not immediately hung vertically, but placed on the surface. You can use a dryer and lay the product on it, or cover the floor with a light-colored cloth and place the parts on top.
2. If you wash with a machine, then after drying in a horizontal position for about 2-3 hours, after manual washing, it will take more time.
3. Then they are hung on a clothesline in any convenient way.
4. For a product with a holofiber filler, the stage of drying on the surface can be eliminated, things are immediately hung out and dried using the traditional method.
5. If possible, it is better to do it outdoors or on a balcony.

Crib bumpers should not be placed on heaters. When the product is completely dry, remove the covers and iron it using steam. If the upper fabric part is not removable, it is better to refuse ironing.

Useful Tips

To extend the life of the crib kit and keep the product's presentation, it is recommended:

• remove fresh stains with a damp cloth immediately, do not allow them to dry;
• wash only with gentle means;
• it is better to purchase crib bumpers with removable covers that wash as they become dirty.

Conclusion

It is advisable to wash the sides in the crib for newborns immediately after purchasing them. Further, the frequency of cleaning depends on the age of the child and the sanitary condition of the room. Daily wet cleaning will prevent dust accumulation in the product. For newborns, the event is carried out once every 1.5 months, if there are no stains on the bumpers, the pillow is washed more often - approximately once every three weeks. Use detergents designed for children's clothing.